Experimental, Numerical and Analytical Evaluation of Load-Bearing Capacity of Cold-Formed S-Beam with Sectional Transverse Strengthening.

The article provides information about strengthening cold-formed thin-walled steel beams made of the sigma profile. An innovative concept for sectional transverse strengthening of thin-walled beams subjected to concentrated forces was investigated. The proposed solution's novelty lies in attaching the sectional transverse strengthening to the beam's cross-section, employing a point crimping technique. This technique requires a specific modification of the cross-section edges, necessitating double-lipped flanges. This strengthening method is innovative, as it has not been previously applied to cold-formed structures. Typically, strengthening is achieved using other cold-formed elements or materials, such as timber, lightweight concrete, or CFRP tapes. The laboratory experimentally validated the proposed method using short- and medium-length beams. The experimental results were then compared with the results of the numerical analyses and the conventional design approach described in EC3. The results demonstrated the feasibility of implementing this type of strengthening, its reliability under load, and the confirmation of an increase in the load-bearing capacity of the experimental samples by 11-24%.