Abstract
INTRODUCTION: At the start of the 2000s, the progressive diffusion of high-flux extracorporeal dialysis and membranes saw an increased use of high infusion volumes injected into the patient's blood circuit following the advent of on-line water production plants. METHODOLOGY: Our 15-year experience with on-line extracorporeal methodologies using very high infusion volumes has led to the detection of errors and weaknesses, thus allowing us to correct and provide for the implementation of appropriate technology in dialysis water production plants with the aim of ensuring a higher chemical-physical, bacteriological and endotoxin quality. The initial procedures had already been outlined in the 2005 Italian Guidelines, although still today Health Technicians and Nephrologists operating in the field are unable to take on board specific integrations for on-line methods due to a lack of upgrading of documentation in both European and non-European Guidelines. RESULTS: After more than 17 years' experience, and in view of the technological implementations developed since 2005, we wish to put forward a series of suggestions in an attempt to improve the safety of on-line water, with uses ranging from drinking water, pre-treatment, osmosis, distribution circuit, hemodialysis monitors up to the most recent update of microbiological cultures. DISCUSSION: Additional, more stringent measures are required to prevent the occurrence of acute accidents during dialysis sessions and to reduce chronic inflammation-oxidation deriving from the use of not totally ultra-pure/sterile dialysis fluids. CONCLUSION: Our point of view based on our long-standing experience, the proposals made relate to procedures to be applied in technological maintenance, which the consultant nephrologist and other relevant personnel such as microbiologists, biologists, and technical operators should adhere to rigorously to ensure that the production of dialysis water on-line is viewed on a par with a pharmacological administration.