Abstract
This paper describes a highly controllable method to generate hollow calcium alginate microfibers using a double co-axial flow microdevice. The microdevice was fabricated by concentric assembly of two modules; each module consisted of a shortened cone-pulled glass capillary embedded in a polymethylmethacrylate fluidic block. Using this microdevice, cylindrical hollow calcium alginate microfibers with either straight or helical inner walls were stably and continuously generated. The radii of the hollow microfibers were not arbitrary, and in fact, the ratio of the outer to inner diameter was inversely correlated with the combination of core flow rate and the first sheath flow rate. The relationships between the geometrical features of the helix and the flow rates were also analyzed. The helical pitch and the spiral radius of the helical hollow microfibers were strongly influenced by the second sheath flow rate. Finally, guidelines for generating highly controllable straight and helical hollow microfibers and fabricating a seamless flow connector using this microfluidic device are suggested.