Abstract
The purpose of the study was to investigate possible variation of thickness of the cervical spine endplate with respect to endplate orientation (superior or inferior endplate) and level distribution (C4-C7). Six human cervical spine segments C4-C7 were used to create six specimen of C4, C5, C6, and C7, respectively. The bony endplates of each vertebra were cleaned carefully from disc tissue without damaging the endplates. Six endplates with severe degenerative changes were excluded from the study. The posterior elements were removed, and a midaxial cut using a bone saw was performed through each vertebral body, thus producing a superior and inferior half. Each half-vertebra was then glued onto a piece of wood with the endplate oriented upwards and horizontally. For each specimen, four computed tomography scans were taken and thickness of the endplate was measured at five points on each scan perpendicular to the midaxial cut. Factorial analysis of variance (ANOVA) and Scheffe-test were used to detect significant differences. All peripheral regions were significantly thicker than the central point of the endplate if all measuring points were considered for statistical analysis, regardless of scan, endplate orientation or level (Scheffe-test, P<0.001). In both superior and inferior endplates, peripheral areas were thicker than the central region (Scheffe-test, P<0.001). For all levels, the endplate within the peripheral regions was thicker than within the central region and the difference reached significance for the superior and inferior endplate of C4, C5, and C6 and the inferior endplate of C7 (Scheffe-test, P<0.05). The peripheral regions of the cervical spine endplate are usually thicker than its central region, regardless of endplate orientation and level (C4, C5, C6, C7) distribution.