A Crosslinked Polyethyleneglycol Solid Electrolyte Dissolving Lithium Bis(trifluoromethylsulfonyl)imide for Rechargeable Lithium Batteries

用于可充电锂电池的交联聚乙二醇固体电解质溶解双(三氟甲基磺酰基)酰亚胺锂

阅读:8
作者:Guiying Tian, Zijian Zhao, Tatiana Zinkevich, Katharina Elies, Frieder Scheiba, Helmut Ehrenberg

Abstract

Replacing liquid electrolytes with solid ones can provide advantages in safety, and all-solid-state batteries with solid electrolytes are proposed to solve the issue of the formation of lithium dendrites. In this study, a crosslinked polymer composite solid electrolyte was presented, which enabled the construction of lithium batteries with outstanding electrochemical behavior over long-term cycling. The crosslinked polymeric host was synthesized through polymerization of the terminal amines of O,O-bis(2-aminopropyl) polypropylene glycol-block-polyethylene glycol-block-polypropylene glycol and terminal epoxy groups of bisphenol A diglycidyl ether at 90 °C and provided an amorphous matrix for Li+ dissolution. This composite solid electrolyte containing Li+ salt and garnet filler exhibited high flexibility, which supported the formation of favorable interfaces with the active materials, and possessed enough mechanical strength to suppress the penetration of lithium dendrites. Ionic conductivities higher than 5.0×10-4 S cm-1 above 45 °C were obtained as well as a wide electrochemical stability window (>4.51 V vs. Li/Li+ ) and a high Li+ diffusion coefficient (≈16.6×10-13 m2 s-1 ). High cycling stability (>500 cycles or 1000 h) was demonstrated.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。