Abstract
This study aims to prepare activated carbon from an interesting biomaterial, corresponding to the cores of Ziziphus lotus, for the first time to the best of our knowledge, according to a manufacturing process based on its chemical and thermal activation. These cores were chemically activated by sulfuric acid for 24 h and then carbonized at 500°C for 2 hours. The obtained activated carbon was characterized by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller (BET) analysis. The adsorption of methylene blue (MB) on the activated carbon was evaluated, by Langmuir and Freundlich models examination, in order to explain the adsorption efficiency in a systematic and scientific way. Moreover, pseudo-first-order and pseudo-second-order kinetic models were used to identify the mechanisms of this adsorption process. The characterization results showed an important porosity (pore sizes ranging from 10 to 45 µm), a surface structure having acid groups and carboxylic functions, and a specific surface of 749.6 m(2)/g. Results of the MB adsorption showed that this process is very fast as more than 80% of MB is adsorbed during the first 20 minutes. In addition, increasing the contact time and temperature improves the MB removal process efficiency. Moreover, this adsorption's kinetic modeling follows the pseudo-second-order model. Furthermore, data on the adsorption isotherm showed a maximum adsorption capacity of 14.493 mg/g and fit better with the Langmuir model. The thermodynamic parameters (∆G(0), ∆S(0), and ∆H(0)) indicate that the adsorption process is endothermic and spontaneous. Therefore, Ziziphus lotus can be used as a low-cost available material to prepare a high-quality activated carbon having a promising potential in the wastewater treatment.