Particle flow rate from the airways as fingerprint diagnostics in mechanical ventilation in the intensive care unit: a randomised controlled study

呼吸道颗粒流速作为重症监护室机械通气中的指纹诊断指标:一项随机对照研究

阅读:1

Abstract

INTRODUCTION: Mechanical ventilation can be monitored by analysing particles in exhaled air as measured by particle flow rate (PFR). This could be a potential method of detecting ventilator-induced lung injury (VILI) before changes in conventional parameters can be detected. The aim of this study was to investigate PFR during different ventilation modes in patients without lung pathology. METHOD: A prospective study was conducted on patients on mechanical ventilation in the cardiothoracic intensive care unit (ICU). A PExA 2.0 device was connected to the expiratory limb on the ventilator for continuous measurement of PFR in 30 patients randomised to either volume-controlled ventilation (VCV) or pressure-controlled ventilation (PCV) for 30 min including a recruitment manoeuvre. PFR measurements were continued as the patients were transitioned to pressure-regulated volume control (PRVC) and then pressure support ventilation (PSV) until extubation. RESULTS: PRVC resulted in significantly lower PFR, while those on PSV had the highest PFR. The distribution of particles differed significantly between the different ventilation modes. CONCLUSIONS: Measuring PFR is safe after cardiac surgery in the ICU and may constitute a novel method of continuously monitoring the small airways in real time. A low PFR during mechanical ventilation may correlate to a gentle ventilation strategy. PFR increases as the patient transitions from controlled mechanical ventilation to autonomous breathing, which most likely occurs as recruitment by the diaphragm opens up more distal airways. Different ventilation modes resulted in unique particle patterns and could be used as a fingerprint for the different ventilation modes.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。