Abstract
After a long decomposition process, organic matter turns into humic substances. In humus, carbon dioxide (CO(2)) bound in photosynthesis is brought back to the soil, where it should be used by its ecosystem. This is important because similar relationships are found in modern concretes and concretes designed with the use of geochemical modeling (possibility of the C-S-H phase for storing harmful substances). The aim of the article was to investigate the possibility of using humus (Humus Active-HA) and vermicompost (Biohumus Extra Universal-BEU), i.e., organic matter resulting from a long process of biological decomposition in the production of autoclaved bricks containing only ecological materials, i.e., sand, lime, and water. Tests of compressive strength, density, microstructure based on SEM, XRD, and micro-CT analysis were performed. The results of the research indicate that humus and vermicompost can be successfully used in their production. The paper compares traditional products and products made of raw material mass containing 3%, 7%, and 11% of humus and vermicompost, using the apparatus of mathematical experiment planning. Compressive strength, volumetric density, water absorption, and wicking, porosity, and material microstructure were tested. The best results were obtained for samples with the addition of 7% humus and 3% vermicompost. The compressive strength increased to 42.04 MPa (compared to standard bricks, whose strength is 15-20 MPa), and the bulk density increased by about 55%, to the value of 2.11 kg/dm(3), which indicates the densification of the material's microstructure. They were characterized by the highest compressive strength, moderate water absorption, and a high proportion of closed pores in the sample.