Abstract
Nano‐titania, chondroitin‐4‐sulphate, and titania/chondroitin‐4‐sulphate nanocomposite were separately deposited on Ti–6Al–4V alloys by repetitive spin coating. Surface characterisation techniques were used to find out the crystalline nature, chemical bonding, surface homogeneity, and elemental composition. Biological studies of nanocomposite‐coated alloys revealed the formation of stable hydroxyapatite (Ca/P = 1.678), superior corrosion resistance, and ∼12 mm zone of inhibition against Staphylococcus sp. However, the cell line studies revealed the better response on polymer‐coated alloy than the uncoated and composite‐coated alloy. It has been found that the nanocomposite coating can synergistically increase the thickness of the pre‐existing passive layer and thereby improve the corrosion resistance of Ti–6Al–4V implant in simulated body fluid. The nanocomposite coatings improved the corrosion resistance of the bare Ti–6Al–4V implant specimens by decreasing the i (corr). The formation of hydroxyapatite on nanocomposite‐coated alloy may have ability to inhibit the release of toxic substance to the adjacent tissues. In addition, the in vitro cell line study confers that the nanocomposite‐coated Ti–6Al–4V induces cell attachment and proliferation, and it eventually help to new bone cell formation than the uncoated one. Overall, this nanocomposite coating can be applied in orthopedic applications for effective biomimic bone regeneration.