Evaluation of Ion Recombination Correction for Indigenously Developed Farmer Ion Chamber in Flattening Filter-Free Photon Beams

对自主研发的农民电离室在无滤光片平坦光子束中的离子复合校正进行评估

阅读:2

Abstract

PURPOSE AND AIM: Modern generation linear accelerator (linac) either generates X-rays with a flattening filter (WFF beam) or without flattening filter free (FFF beam). The FFF beams are associated with a significantly higher dose per pulse compared to WFF beams due to the absence of a flattening filter and the corresponding attenuation caused by it. This results in increased ion recombination and a larger saturation correction factor (k(s)). In accordance with the IAEA TRS 398 dosimetry protocol, k(s) is necessary for the accurate measurement of absorbed dose at a point in water. The objective of this study was to evaluate the k(s) for the indigenous FAR 65-GB ion chamber (IC) for the FFF X-rays. MATERIALS AND METHODS: The study was carried out on TrueBeam linac (Varian, A Siemens Healthineers company) which offers 6 MV WFF, 6 MV FFF, 10 MV WFF and 10 MV FFF beams. The two-voltage method was employed to measure k(s) in a solid water phantom at a depth of 10 cm for a FAR 65-GB and SNC 600c and 0.6cc PTW 30013 Farmer chambers at 100 cm and 150 cm source-to-chamber distances for a 10 cm × 10 cm field size. RESULTS: The k(s) values for the FAR 65-GB, PTW 30,013, and SNC 600c were 1.0055 (1.0113), 1.0051 (1.0071), and 1.0033 (1.0066) for the 6 MV WFF (FFF) beams, respectively, and 1.0066 (1.0178), 1.0061 (1.0137), and 1.0035 (1.0119) for the 10MV WFF (FFF) beams, respectively. The k(s) values calculated by two-voltage method matches with k(s) values obtained from Jaffe's plot. The chamber exhibited a linear dose-response up to 3000 cGy, beyond which a saturation effect was observed. CONCLUSIONS: Our study reveals that this chamber is suitable for the reference dosimetry for the FFF beams.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。