Mechanical Properties of Large Slump Concrete Made by Post-Filling Coarse Aggregate Mixing Procedure

采用后填粗骨料搅拌法制备的大坍落度混凝土的力学性能

阅读:1

Abstract

High-performance pumping concrete has been widely used in high-rise building construction because of its superior qualities. However, early cracking problems can occur in cast-in-place pumping concrete, which is due to the excessive use of cement. In this paper, an innovative concrete mixing procedure called "post-filling coarse aggregate concrete" (PFCC) was adopted and applied to large slump concrete. The influence of the post-filling coarse aggregate (PFA) ratio on the mechanical properties of large slump concrete were investigated. Three different concrete strength grades (C30, C40 and C50) and five different PFA ratios (0%, 10%, 15%, 20%, 25%) were considered. The designed slump for the reference concrete was 180-200 mm. Experimental tests on the compressive strength of cubic specimens, axial compressive strength of prism specimens, splitting tensile strength, modulus of rupture and modulus of elasticity were performed. All tests were conducted in room conditions. Results showed that the slump of the PFCC decreases as the PFA ratio increases. It also indicated that, in general, the mechanical properties of PFCC are not linearly increasing as the PFA ratio rises, and there exists a turning point. Based on the experimental investigation and analysis in this study, the optimum post-filling coarse aggregate ratio is recommended to be 20%.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。