Abstract
Carbon nanotubes (CNTs) have attracted growing interest as a filler in rubber nanocomposites due to their mechanical and electrical properties. In this study, the mechanical properties of a NR/BR/IR/SBR compound reinforced with single-wall carbon nanotubes (SWCNTs) were investigated using atomic force microscopy (AFM), tensile tests, hardness tests, and a dynamical mechanical analysis (DMA). The tested materials differed in SWCNT content (1.00-2.00 phr) and were compared with a reference compound without the nanofiller. AFM was used to obtain the topography and spectroscopic curves based on which local elasticity was characterized. The results of the tensile and hardness tests showed a reinforcing effect of the SWCNTs. It was observed that an addition of 2.00 phr of the SWCNTs resulted in increases in tensile strength by 9.5%, Young's modulus by 15.44%, and hardness by 11.18%, while the elongation at break decreased by 8.39% compared with the reference compound. The results of the temperature and frequency sweep DMA showed higher values of storage and loss moduli, as well as lower values of tangent of phase angle, with increasing SWCNT content.