Soft robotics, a research field wherein robots are fabricated from compliant materials, has sparked widespread research interest because of its potential applications in a variety of scenarios. In soft robots, luminescence is an important functionality for communication and information transmission, and it is typically achieved through electroluminescence, which relies on synthetic substances activated by external electric sources, such as batteries. This paper focuses on the use of luciferase, a biologically derived luminescent enzyme, as a luminescent material. Bioluminescence, which is triggered by the luciferin-luciferase reaction, is highly energy-efficient, nontoxic, and eco-friendly. In this regard, a mammalian cell-derived secreted luciferase bioluminescent liquid was developed. This bioluminescent liquid is strongly bright, stable, freezable, and scalable for use as a soft robotic material. To investigate the applicability of this bioluminescent liquid to soft robotics, it was incorporated as an electrode in electrically driven soft actuators, sensors, and robots. Specifically, dielectric elastomer sensors (DESs) and dielectric elastomer actuators (DEAs) were fabricated and characterized using established fabrication processes. The resistivity of the bioluminescent liquid was found to be 448.1 Ω·cm. When the DES was subjected to uniaxial strain, it exhibited a linear response and large deformation of up to 200% strain, with a simultaneous luminance change of 27%. The DEA displayed an areal strain of 46.0% and a luminance change of 31% at an applied voltage of 3.4 kV. The waterproof bending DEA generated a tip angle of 21.8° at 10 kV and was applied to a jellyfish robot that could swim in water at a speed of 2.1 mm/s. The experimental results demonstrated the successful operation of these devices, validating the concept of energy-efficient, safe, and environmentally friendly bioluminescent soft robots.
Electrically Driven, Bioluminescent Compliant Devices for Soft Robotics.
用于软体机器人的电动生物发光柔性器件
阅读:6
作者:Kusama Kengo, Oishi Atsuro, Ueno Hitoshi, Yoshimi Akihide, Nagase Miki, Shintake Jun
| 期刊: | ACS Applied Materials & Interfaces | 影响因子: | 8.200 |
| 时间: | 2025 | 起止号: | 2025 Feb 19; 17(7):11248-11258 |
| doi: | 10.1021/acsami.4c18209 | ||
特别声明
1、本文转载旨在传播信息,不代表本网站观点,亦不对其内容的真实性承担责任。
2、其他媒体、网站或个人若从本网站转载使用,必须保留本网站注明的“来源”,并自行承担包括版权在内的相关法律责任。
3、如作者不希望本文被转载,或需洽谈转载稿费等事宜,请及时与本网站联系。
4、此外,如需投稿,也可通过邮箱info@biocloudy.com与我们取得联系。
