Experimental and Numerical Investigations on the Thermomechanical Behavior of 304 Stainless Steel/Q345R Composite Plate Weld Joint.

In this study, the welding process of 304 stainless steel/Q345R low alloy steel composite plate is modeled by experimental and finite element methods to study the complex thermomechanical behavior. The residual stress and microstructure evolution of composite plate in the welding process are also investigated. The welding thermal cycle curve and residual stress distribution at the joint are obtained by using thermocouple and blind-hole methods. Optical microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were used to investigate the evolution of microstructure, morphology, and element diffusion of the joint. The results show that the maximum von Mises welding residual stress is 312 MPa, which is located in the bottom of the start point of the weld zone. The residual stress gradually decreases and tends to be stable along the direction from the weld to the base metal. In addition, a residual stress discontinuity is found at the interface between the bimetal. It is also found that the closer it is to the weld joint, the more uniform is the austenite distribution and the smaller are the grain sizes.