Simple Color Calibration Method by Projection onto Retroreflective Materials.

Retroreflective materials have the property of directional reflection, reflecting light strongly in the direction of the light source, and have been used for road traffic signs. In recent years, retroreflective materials have been used in entertainment and industrial technologies, in combination with projection mapping technology. In general, color calibration is important when projectors are used to control reflected colors. In this study, we investigated a simple color calibration method for retroreflective materials with a 3D shape under the condition that they are observed in the same direction as the light source. Three types of retroreflective materials with different reflective properties were used. First, to measure the reflective properties of each reflective material, the reflective material was fixed to a flat plate and rotated, while the reflected light was measured in the same direction as the light source. It was then confirmed that the reflected light intensity varied smoothly with angular change, and appropriate measurement angles were investigated based on the AIC criterion, aiming to interpolate the reflectance characteristics from a small number of measurement angles. Color calibration was performed based on the reflectance characteristics obtained from the derived measurement angles, and the experiments showed that good color calibration was possible with fewer measurements.