A green TLC densitometric method for the simultaneous detection and quantification of naphazoline HCl, pheniramine maleate along with three official impurities.

Impurity profiling of a pharmaceutical compound is now taking great attention during quality assessment of pharmaceuticals, as presence of small amount of impurities may affect safety and efficacy. In this work, a novel TLC chromatographic method coupled with densitometric detection was established for the simultaneous quantification of naphazoline HCl, pheniramine maleate and three of their official impurities, namely; naphazoline impurity B, pheniramine impurities; A & B. Chromatographic separation was carried out on TLC aluminum silica plates F254, as a stationary phase, using methanol: ethyl acetate: 33.0% ammonia (2.0: 8.0: 1.0, by volume), as a mobile phase. Plates were examined at 260.0 nm and International Council for Harmonisation (ICH) guidelines were followed for method's validation. Important factors, such as; composition of mobile phase and detection wavelengths were optimized. Linearity was achieved over the ranges of 2.0-50.0 µg band(-1) for naphazoline, 10.0-110.0 µg band(-1) for pheniramine, 0.1-10.0 µg band(-1) for naphazoline impurity B and 2.0-50.0 µg band(-1) for both pheniramine impurities. The proposed method was assessed in terms of accuracy, precision and robustness where satisfactory results (recovery % ≈ 100% and RSD < 2) were obtained. The method was also applied for the simultaneous determination of naphazoline HCl and pheniramine maleate, in Naphcon-A(®) eye drops, with respective recoveries of 101.36% and 100.94%. Method greenness was evaluated and compared to the reported HPLC one via environmental, health and safety tool. The developed method has much potential over the reported one of being simple, selective, economic and time saving for the analysis of the five cited compounds.