Triaxial Creep Mechanical Behaviors and Creep Damage Model of Dolomitic Limestone Material under Multi-Stage Incremental Loading.

Dolomitic limestone is the main surrounding rock material in Yangzong tunnel engineering; the instantaneous mechanical properties and creep behaviors of limestone are significant for stability evaluation during the stages of tunnel excavation and long-term maintenance. Herein, four conventional triaxial compression tests were carried out to explore its instantaneous mechanical behavior and failure characteristics; subsequently, the creep behaviors of limestone subjected to multi-stage incremental axial loading at the confinements of 9 MPa and 15 MPa were studied by employing an advanced rock mechanics testing system (i.e., MTS815.04). The results reveal the following. (1) comparing the curves of axial strain-, radial strain-, and volumetric strain-stress under different confining pressures shows that these curves present a similar trend, whereas the stress drops during the post-peak stage decelerate with the increase in confining pressure, suggesting that the rock transits from brittleness to ductility. The confining pressure also has a certain role in controlling the cracking deformation during the pre-peak stage. Besides, the proportions of compaction- and dilatancy-dominated phases in the volumetric strain-stress curves differ obviously. Moreover, the failure mode of the dolomitic limestone is a shear-dominated fracture but is also affected by the confining pressure. (2) When the loading stress reaches a creep threshold stress, the primary and steady-state creep stages occur successively, and a higher deviatoric stress corresponds to a greater creep strain. When the deviatoric stress surpasses an accelerated creep threshold stress, a tertiary creep appears and then is followed by creep failure. Furthermore, the two threshold stresses at 15 MPa confinement are greater than that at 9 MPa confinement, suggesting that the confining pressure has an obvious impact on the threshold values and a higher confining pressure corresponds to a greater threshold value. Additionally, the specimen's creep failure mode is one of "abrupt" shear-dominated fracturing and is similar to that under a conventional triaxial compression test at high confining pressure. (3) A multi-element nonlinear creep damage model is developed by bonding a proposed visco-plastic model in series with the Hookean substance and Schiffman body, and can accurately describe the full-stage creep behaviors.