Abstract
Fiber cement reinforced with pulp fibers is one of the key drivers for the decarbonization of nonstructural building materials, where the inclusion of sustainable pulp fibers at high proportions (i.e., > 8 wt %) renders poor workability of fiber-cement slurry with a concomitant loss in mechanical strength. Petrochemical-derived superplasticizers, i.e., polycarboxylates (PCEs), are predominantly used in fiber cement (including cement mortars) because they dramatically improve (content <0.5 wt %) the slurry rheology but reduce the rate of hydration and weaken the strength of the cured composite. Thus, it is crucial to explore renewable and bio-based superplasticizers devoid of any negative traits (if possible) of the conventional PCEs. In this study, we examined wood-derived cellulose nanocrystals (CNCs) as a multifunctional additive in fiber cement (bleached pulp fiber content: 8 wt %). In fiber cement, variation of the content (0.02-4 wt %) of CNCs resulted in improvement in the shear thinning behavior of the fiber-cement slurry and thereafter increased the hydration kinetics at high CNC contents (2-4 wt %). Notably, the flexural strength of the composite also exhibited improvement upon the addition of CNCs; the maximum strength was observed at 4 wt % of CNCs. Overall, the beneficial roles of CNCs afforded >10 wt % (in-total) bio-based content in fiber cement without compromising the mechanical strength and curing time (compared to PCEs); hence, the findings of this study could unravel new avenues in interface engineering of cement composites leveraging the multifunctional features of biomaterials, thus enhancing sustainability.