Abstract
The tribological behavior of 42CrMo4/17NiCrMo6-4 under grease lubrication was explored in terms of load, speed, hardness matching, and lubrication quantity. Optical microscopy, scanning electron microscopy, and a surface profilometer were used to investigate the wear mechanism. The results show that hardness matching has the greatest impact on the wear resistance and friction reduction of the friction pair, followed by the load factor, with the impacts of speed and lubricant quantity being minor. Increasing the hardness of 42CrMo4 reduces the friction coefficient and wear volume of the friction pair substantially. When the maximum surface hardness of 42CrMo4 was compared with the lowest surface hardness, the friction coefficient was reduced by 21.5%, and the wear volume was reduced by 87.2%. Abrasive wear is the sort of wear failure that was seen, and as the hardness of 42CrMo4 increased, more severe fatigue wear appeared on 17NiCrMo6-4. While the wear volume initially increases and subsequently lowers with increasing load, the friction coefficient initially decreases and then stabilizes. A synergistic combination of abrasive and adhesive wear occurs under high load, changing the wear type from abrasive wear under low load. The wear volume is decreased by the sticky layer generated under high load conditions, which achieves superior wear prevention. This study is anticipated to offer recommendations for designing gears' required hardness under various operating circumstances.