Abstract
Sulfide stress corrosion cracking (SSCC) has been of particular concern in high strength low alloyed (HSLA) steels used in the oil industry, and the non-metallic inclusions are usually considered as a detrimental factor to the SSCC resistance. In the present work, continuous casting (CC) and electroslag remelting (ESR) were adopted to fabricate a 125 ksi grade steel in order to evaluate the effect of microstructure with and without primary NbC carbides (inclusions) on the SSCC resistance in the steel. It was found that ESR could remove the primary NbC carbides, and hence, slightly increase the strength without deteriorating the SSCC resistance. The elimination of primary NbC carbides caused two opposite effects on the SSCC resistance in the studied steel. On the one hand, the elimination of primary NbC carbides increased the dislocation density and the proportion of high angle boundaries (HABs), which was not good to the SSCC resistance. On the other hand, the elimination of primary NbC carbides also induced more uniform nanosized secondary NbC carbides formed during tempering, providing many irreversible hydrogen traps. These two opposite effects on SSCC resistance due to the elimination of primary NbC carbides were assumed to be offset, and thus, the SSCC resistance was not greatly improved using ESR.