Abstract
In this study, a simple and efficient hydrothermal strategy was developed to modify reduced graphene oxide (rGO) with copper (II) oxide (CuO) nanoparticles by varying the weight ratio of rGO relative to CuO (rGO@CuO(1:1), rGO@CuO(1:2), and rGO@CuO(2:1)). The obtained materials were further characterized using analytical tools. Photocatalytic performance was assessed using adsorption-photocatalysis experiments under a household LED light source (10 W, λ > 400 nm), and the degree of degradation of doxycycline (DOX) was evaluated using UV-Vis spectrophotometer. The highest efficiency of 100% was achieved with a DOX concentration of 70 ppm, rGO@CuO(1:1) dosage of 1 mg/mL, and pH 7 within 30 min of irradiation. The degradation kinetics followed the pseudo-first-order model (R(2) ~0.99) and the Langmuir adsorption isotherm, indicating that DOX on the surface is governed by a dynamic equilibrium between adsorption and degradation rates. Furthermore, efficacy was tested using real water samples, and the recyclability of the catalyst was evaluated in up to five cycles.