Steps towards overcoming challenges in clinical practice at 1.5T MR-Linac for lung cancer adaptive radiotherapy

克服1.5T磁共振直线加速器在肺癌自适应放射治疗临床实践中挑战的步骤

阅读:4

Abstract

BACKGROUND: The MR-guided adaptive radiotherapy (MRgART) workflow at the 1.5 T Unity MR-Linac relies on synthetic CT (sCT) generated through bulk density assignment. Although sCT-based dose calculations are the standard approach, it is well known that their accuracy can be compromised in lung tumors due to the high dose gradients surrounding the targets. This study investigates clinical cases to determine whether these challenges affect all lung targets or if, for a subset partially located in high-density dose regions, the sCT calculations performed in the Unity clinical workflow are sufficiently accurate, supporting their routine clinical application. METHODS: Forty-eight lung cancer patients undergoing stereotactic body radiotherapy at Unity MR-Linac, were included in this study. Patients were stratified into two groups based on target position: [Formula: see text] group including targets attached to thoracic wall or mediastinum, and [Formula: see text] (group isolated pulmonary target), including targets entirely within the lung parenchyma and surrounded by air-filled lung tissue. The reference treatment plans ([Formula: see text]) were optimised on the simulation CT using inverse-planning intensity modulated radiation therapy (IMRT) with the Monaco treatment planning system to deliver 50 Gy in 5 fractions. [Formula: see text] included all contour information needed to generate the sCT through bulk electron density assignment, the standard procedure for Unity MR-Linac. To evaluate the dosimetric accuracy of sCT-based dose calculations, a second plan ([Formula: see text]) was created by recalculating [Formula: see text] on the sCT derived from the reference CT. The sCT was generated using the MRgART routine, which assigns mean ED values to all contoured structures. Dose-volume histograms were compared between [Formula: see text] and [Formula: see text] for targets and organs at risk (OARs), with additional evaluation of tumor control probability, and normal tissue complication probability. Dose distributions were further evaluated using global gamma analysis with 3%/3 mm and 2%/2 mm criteria. RESULTS: Significant differences (p < 0.05) in key dosimetric parameters ([Formula: see text], [Formula: see text], [Formula: see text]) were observed between [Formula: see text] and [Formula: see text] in the [Formula: see text] group, with percentage differences reaching up to 3.49%. Conversely, in [Formula: see text], percentage differences were less than 1% and not statistically significant (p > 0.05). For OARs, no significant differences (p > 0.05) were observed in either group, except for the lungs minus the gross tumor volume (lungs-GTV), where percentage differences remained below 1.5%. Radiobiological modelling yielded consistent results, confirming the dosimetric findings. Gamma analysis showed consistent dose distributions, with a global pass rate above 95% for 3%/3 mm criteria and above 90% for 2%/2 mm criteria. CONCLUSIONS: This study demonstrates that sCT-based dose calculations are feasible and reliable for pulmonary targets attached to the thoracic wall or mediastinum, supporting their routine integration into MRgART workflows on the Unity MR-Linac. However, for isolated pulmonary targets, deviations should be considered when implementing sCT-based planning in clinical practice.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。