Abstract
PURPOSE: Make-up clumps, bumps and collapses are the three factors that determine how well make-up has been performed. The purpose of this study is to reduce the three factors mentioned above by using amphiphilic substances to increase the affinity between the skin and the make-up layer. In addition, it aims to evaluate the improvement of the make-up layer by developing an objective make-up layer evaluation method. METHODS: Experiments were performed in an attempt to increase the affinity between the skin and the make-up layer by minimizing the difference in surface energy between the two. Multiple types of artificial skin (leather and bio-skin) were used and treated to form the liquid foundation layer. Qualitative evaluation of the make-up layer was conducted by analyzing the surface, cross-section, and fracture area of the make-up layer, using the evaluation method proposed in this study. RESULTS: After applying this method and taking measurements by 3D surface analysis, the surface roughness of the make-up layer reduced by 46%, and the maximum thickness of the make-up layer reduced by about 50% in comparison with the control group (method not applied). In the case of the make-up layer to which this method was applied, two-dimensional cross-sectional Scanning Electron Microscope (SEM) image analysis confirmed that agglomeration was reduced, and the thickness of the make-up layer was also reduced by an average of 54%. According to this result, the technique of increasing the affinity between the skin and the make-up layer reduces the level of aggregation of make-up and encourages the formation of a uniform and thin make-up layer. Also, the fracture area after motion simulation was reduced by 33%. These results indicate that the method of increasing the affinity between skin/make-up membranes positively affects the formation of a uniform make-up layer. CONCLUSION: Increasing the affinity by reducing the surface energy between the skin and the make-up layer plays an important role in forming a thin and uniform make-up layer by improving the problems of lifting, agglomeration, and collapse of the make-up. In addition, it has been confirmed that through this method, the quality of consumer experience related to make-up satisfaction can be improved. The results show that objective analyses of make-up help the understanding of the quality of consumer experience on make-up.