Abstract
The microcrystalline cellulose is an important ingredient in pharmaceutical, food, cosmetic and other industries. In this study, the microcrystalline cellulose, obtained from the stalk of Sorghum caudatum was evaluated for its physical and tableting characteristics with a view to assessing its usefulness in pharmaceutical tableting. The microcrystalline cellulose, obtained from the stalk of Sorghum caudatum, obtained by sodium hydroxide delignification followed by sodium hypochlorite bleaching and acid hydrolysis was examined for its physicochemical and tableting properties in comparison with those of the well-known commercial microcrystalline cellulose grade, Avicel PH 101. The extraction yield of this microcrystalline cellulose, obtained from the stalk of Sorghum caudatum was approximately 19%. The cellulose material was composed of irregularly shaped fibrous cellulose particles and had a moisture content of 6.2% and total ash of 0.28%. The true density was 1.46. The flow indices showed that the microcrystalline cellulose, obtained from the stalk of Sorghum caudatum flowed poorly. The hydration, swelling and moisture sorption capacities were 3.9, 85 and 24%, respectively. Tablets resulting from these cellulose materials were found to be without surface defects, sufficiently hard and having disintegration time within 15 min. The study revealed that the microcrystalline cellulose, obtained from the stalk of Sorghum caudatum compares favourably with Avicel PH 101 and conformed to official requirement specified in the British Pharmacopoeia 1993 for microcrystalline cellulose.