Abstract
The low intrinsic thermal conduction and high dielectric properties of epoxy resins have significantly limited their applications in electrical and electronic devices with high integration, high frequency, high power, and miniaturization. Herein, a liquid crystalline epoxy (LCE) monomer with a biphenyl mesogenic unit was first synthesized through an efficient one-step reaction. Subsequently, bisphenol AF (BPAF) containing low-polarizable -CF(3) groups and 4,4'-diaminodiphenylmethane (DDM) were applied to cure the LCE and commercial diglycidyl ether of bisphenol A-type epoxy (E-51), respectively, to afford four kinds of epoxy resins with various intrinsic thermal conductivity and dielectricity values. Owing to the dual effect of microscopically stacking of mesogens and the contribution of fluorine to the formation of liquid crystallinity, ordered microstructures of the nematic liquid crystal phase were formed within the cross-linking network of LCE as confirmed by polarized optical microscopy and X-ray diffraction. Consequently, phonon scattering was suppressed, and the intrinsic thermal conductivity was improved considerably to 0.38 W/(m·K), nearly twice as high as that of E-51 cured with DDM (0.20 W/(m·K)). Additionally, the ordered microstructure and ultralow polar -CF(3) groups within LCE cured with BPAF enabled the epoxy resin to exhibit a remarkably lower and stable dielectric constant (ε) and dielectric loss tangent (tan δ) over both low and high frequencies compared to E-51 cured with DDM. The ε decreased from 3.40 to 2.72 while the tan δ decreased from 0.044 to 0.038 at 10 GHz. This work presents a scalable and facile strategy for breaking the bottleneck of making epoxy resins simultaneously with high inherent thermal conduction and low dielectric performance.