Abstract
HYPOTHESIS: Intracochlear sound pressures (PIC) and velocity measurements of the stapes, round window, and promontory (VStap/RW/Prom) will show frequency-dependent attenuation using magnet-based transcutaneous bone conduction implants (TCBCIs) in comparison with direct-connect skin-penetrating implants (DCBCIs). BACKGROUND: TCBCIs have recently been introduced as alternatives to DCBCIs. Clinical studies have demonstrated elevated high-frequency thresholds for TCBCIs as compared with DCBCIs; however, little data exist examining the direct effect of skin thickness on the cochlear input signal using TCBCIs. METHODS: Using seven cadaveric heads, PIC was measured in the scala vestibuli and tympani with fiber-optic pressure sensors concurrently with VStap/RW/Prom via laser Doppler vibrometry. Ipsilateral titanium implant fixtures were placed and connected to either a DCBCI or a TCBCI. Soft tissue flaps with varying thicknesses (no flap and 3, 6, and 9 mm) were placed successively between the magnetic plate and sound processor magnet. A bone conduction transducer coupled to custom software provided pure-tone stimuli between 120 and 10,240 Hz. RESULTS: Stimulation via the DCBCI produced the largest response magnitudes. The TCBCI showed similar PSV/ST and VStap/RW/Prom with no intervening flap and a frequency-dependent nonlinear reduction of magnitude with increasing flap thickness. Phase shows a comparable dependence on transmission delay as the acoustic baseline, and the slope steepens at higher frequencies as flap thickness increases, suggesting a longer group delay. CONCLUSION: Proper soft tissue management is critical to optimize the cochlear input signal. The skin thickness-related effects on cochlear response magnitudes should be taken into account when selecting patients for a TCBCI.