Abstract
Polyaniline nanofibers (PANI NFs) were synthesized and employed as potential adsorbents in a continuous flow fixed-bed column adsorption study for an organic dye, Methyl Orange (MO) removal from water. These nanostructured adsorbents were characterized using ATR-FTIR, FE-SEM, HR-TEM, TGA, BET, XRD, XPS, and the Zeta-sizer. Morphological representations from SEM and TEM analyses showed that the fibers were nanosized with diameters lower than 80 nm and an interconnected network possessing a smooth surface. The S(BET) of the PANI NFs was found to be 35.80 m(2)/g. The impact of column design parameters for instance; influent concentration, flow rate, and bed mass was investigated using pH 4 influent MO solutions optimized through batch studies. The best influent concentration, bed length, and flow rate for this study were determined as 25 mg/L, 9 cm (6 g), and 3 mL/min, respectively. The column information was fitted in Thomas, Yoon-Nelson, and Bohart-Adams models. It appeared that the Thomas and Yoon-Nelson models described the data satisfactorily. The PANI NFs were able to treat 29.16 L of 25 mg/L MO solution at 9 cm bed length. A sulfate peak in a de-convoluted sulfur spectrum using XPS verified the successful adsorption of Methyl Orange.