Abstract
OBJECTIVES: This paper aimed to assess the motor performance in the Burpee Movement Program through the acceleration recorded by the Phyphox mobile app and define its relationship to strength and endurance parameters. METHODS: Altogether, 15 students in physical education teaching completed the 3 × 3 min Burpee Movement Program, consisting of the repeated execution of a single burpee with maximum effort at regular intervals triggered by a sound signal. During the load phase, the intensity of the burpee and the fatigue index expressed in percentages were evaluated by means of the acceleration recorded through a mobile phone. In the second part of testing, we evaluated the performance parameters during a bench press and squat where the intensity was measured using a linear displacement transducer (Tendo Power Analyzer) and aerobic endurance was assessed with a 20 m shuttle run test (20 mSR). RESULTS: The average intensity of the burpee ranged from 3.12 to 11.12 ms(-2). The fatigue index ranged from -21.95% (which represented an increase in performance) to 33.63% (which represented a decrease in performance). The performances in the bench presses ranged from 58 to 480 W and from 175 to 696 W during the squats. The distance in the 20 m shuttle run test (20 mSR) ranged from 540 to 2000 m. The intensity of the burpee showed a significant correlation to the performances achieved in the bench presses and squats r = 0.82 and 0.79. The fatigue index showed a significant correlation to the 20 m shuttle run test (20 mSR) r = -0.67. CONCLUSIONS: These findings indicate that in, our case, the results from the Burpee Movement Program are significantly associated with the participants' strength and endurance abilities. We recommend using BMP for the development of strength-endurance abilities, but further exploration is needed regarding the potential use of BMP as a diagnostic test.