Abstract
An enormous interest in the development of efficient protocols for cellulose extraction has been demonstrated in the last few years, although usually based on non-sustainable chemical and thermal approaches. In this work, we propose a new and more sustainable method for cellulose extraction from eucalyptus and pine tree wood waste products exclusively performed using microwave-assisted radiation. The methodology includes three main steps: (i) alkaline treatment; (ii) bleaching I, using H2O2; and (iii) bleaching II, an acidic treatment. Samples obtained in each step were characterized by Fourier-transform Infrared (FTIR) spectroscopy, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results were compared with the structural and thermal profile of the starting materials, a commercially available microcrystalline cellulose and with an industrial paper pulp sample. Results confirmed that for both types of wood wastes, cellulose was retained during the extraction procedures and that the removal of hemicellulose and lignin was mainly achieved in the last step, as seen by the FTIR spectra and TGA curves. The developed protocol is innovative, as it constitutes an easy and quick approach for extracting cellulose from eucalyptus and pine tree wood waste. Mild chemical and thermal conditions are used during the three extraction steps (microwave irradiation, aqueous solutions, maximum of 120 °C in a total of 3 h). Moreover, environmentally friendly purification steps are applied based on the use of water and ethanol. This approach offers the possibility of a future scale-up study to potentially apply the developed protocol to the extraction of cellulose on an industrial scale.