Abstract
Traditionally, airborne concentrations of aeroallergens are sampled in a single location by an active sampler, which requires electricity and regular maintenance. However, aeroallergen concentrations may vary widely over urban and rural environments, requiring a method that is cost-effective and scalable so that many measurements can be made across an air shed. We developed such a method that uses passive sampling and light microscopy for analysis. Inexpensive and easy to operate, passive samplers rely on the gravitational settling of particles onto microscope slides. This determines airborne pollen concentration through: 1) sample collection using a modified Durham sampler, 2) preparation of samples for microscopy and strategic sample imaging, and 3) simplified particle measurements and calculation of pollen concentration following deposition velocity models proposed by Scheppegrell [1] and Wagner and Leith [2]. This method was verified with two sampling campaigns during the ragweed season of 2020 and the tree pollen season of 2021. The concentrations determined with the passive and Burkard sampling methods were found to be well-correlated (r > 0.99, r = 0.87) and precise (%CV = 20 %, 21 %). The validation of passive samplers will enable measurements of aeroallergens over wider spatial scales and help determine where aeroallergen exposure risks are greatest. •An inexpensive and low-cost method was developed to determine airborne pollen counts.•The method was evaluated for its accuracy and reproducibility.•The method can be applied to examine the concentrations and spatial variability of airborne pollen.