Abstract
A great challenge among communities participating in germplasm repository development is to obtain suitable cryopreservation equipment and devices. Commercial programmable freezers are costly and thus unaffordable to many users. Self-made devices have substantial variability among users, resulting in few opportunities for standardization across communities. The development of open hardware with the increasing accessibility of three-dimensional (3-D) printing offers rapid prototyping and easy fabrication of devices by users around the world at low cost. The present study explored the feasibility of developing operational prototypes of 3-D printed motorized cryopreservation devices for continuous freezing of non-batched samples. A controlled cooling conveyor device (CCCD) was designed and fabricated to cryopreserve sperm samples in straws that were loaded onto chain links suspended over liquid nitrogen held in a Styrofoam box. Cooling rates of 5 to 34 °C/min for 0.5-ml French straws were produced by adjusting the height of conveyor chains, slopes, and liquid nitrogen mass. The plunge temperature (-47 °C to -61 °C) was controlled by adjustment of conveyor speed. The cooling curves from the CCCD were comparable to a commercial programmable freezer. There were no significant differences in post-thaw motility of sperm from ornamental (Koi) common carp (Cyprinus carpio) among samples frozen with the CCCD and those frozen with a commercial programmable freezer. The post-thaw sperm motility was consistent among samples frozen in the CCCD across a 15-min time span. The CCCD prototypes in the present study proved to be feasible and functional as low-cost, customizable, portable, and yet standardizable options for freezing of individual (non-batched) samples. Additional design alternatives are proposed to facilitate further adaptation and development by diverse user communities.