Abstract
This paper reports on an investigation into determining nanogram/l quantities of mercury in marine and fresh water matrices using a cold vapour generation of mercury, followed by fluorescence detection. Samples were prepared for analysis using a free bromine oxidation technique. A high efficiency gas-liquid separator was used to enhance the detection of mercury. For fresh water, typical method detection limits (MDL) were determined at less than 1 nanogram/l (ng/l). For near shore seawater, the MDL was 1.2 ng/l. Method spikes, which were performed at 20 ng/l, showed mean recoveries within US EPA Contract Laboratory Protocol (CLP) acceptance criteria. System blanks averaged 0.12 ng/l, and recoveries of NIST 1641c diluted to 29.4 ng/l averaged 93.4%. A number of local rivers and streams were sampled, and mercury was determined. All results to date indicate mercury levels below the US EPA chronic water quality criteria for mercury.