Abstract
The utilization of rice straw for biofuel production is limited by its composition. The pretreatment process is required to improve the enzymatic accessibility of polysaccharides in the biomass prior to enzymatic saccharification. In this study, simultaneous biological pretreatment and saccharification (SPS) of rice straw starting from laccase production by Panus neostrigosus I9 was operated in a 2-L fermenter. It was found that fungal physiology was strongly influenced by the agitation, and that the highest laccase production was obtained at an agitation speed of 750 rpm (209.96 ± 0.34 U/L). The dilution rate of 0.05 h(-1) was set in continuous fermentation which resulted in laccase activity of 678.49 ± 20.39 U/L, approximately three times higher than that in batch culture. Response surface methodology (RSM) was applied to achieve the condition for maximum percentage of delignification. The maximum percentage of delignification of 45.55% was accomplished after pretreatment of rice straw with laccase enzyme 39.40 U/g rice straw at 43.70 °C for 11.19 h. Reducing sugar of 3.85 ± 0.15 g/L was obtained from the digested rice straw in a SPS reactor, while non-pretreated rice straw gave only 1.13 ± 0.10 g/L within 12 h of incubation. The results indicated that simultaneous biological pretreatment and saccharification (SPS) of rice straw by laccase helped to improve the accessibility of cellulose by cellulolytic enzymes.