Abstract
The paper undertakes preliminary research towards the identification of the use of plastic waste, taking into account the possibility of increasing their mechanical strength and reducing flammability, as well as reducing the emission of harmful compounds to the atmosphere through the addition of cement. This is extremely important not only from the point of view of the wide use of plastic products in the industry, but also their thermal utilization. The present study deals with the aspect of the utilization of waste polyethylene (HDPE) as a matrix in composites with filler in the form of cement at 5 and 10%. The composite samples were prepared by injection molding after the prior proper mixing of the components. Comparative thermomechanical (DSC, tensile strength, DMTA), microstructure and flammability results are presented for HDPE samples and their composites with cement. It was found that the addition of cement as a filler to polyethylene made it possible to obtain composites with good thermomechanical properties.