Abstract
PURPOSE: One of the biggest challenges in applying megavoltage (MV) treatment beam imaging for monitoring spine motion in stereotactic body radiotherapy (SBRT) is the small beam apertures in the images due to strong beam modulations in IMRT planning. The purpose of this study is to investigate the feasibility of a markerless motion tracking method in spine SBRT delivery using a novel enhanced synthetic treatment beam (ESTB) imaging technique. METHODS: Three clinical spine SBRT plans using 6XFFF beams and sliding window IMRT technique were transferred to a thorax phantom and delivered by a TrueBeam machine. Before delivery, the phantom was aligned to the plan isocenter using CBCT setup and verified with a second CBCT, and then, 2 mm shifts were introduced in both the craniocaudal (CC) and the left-right (LR) directions with the couch. During beam delivery, MV images were continuously taken with an electronic portal imaging device (EPID) and automatically grabbed by Varian iTools Capture software with a frame rate of 11.6 Hz. After preprocessing for scatter correction and beam intensity compensation, every 50 frames of MV images were combined to generate a series of ESTB images for each beam. The ESTB images were then registered to the projections of the verification CBCT at the matched beam angles to detect the 2 mm shifts. RESULTS: Compared to snapshot MV images, the ESTB images had significantly enlarged fields of view (FOVs) and improved image quality. Based on two-dimensional (2D) rigid registration, the ESTB image to CBCT projection matching showed submillimeter accuracy in detecting motion. Specifically, the root mean square errors in detecting the LR/CC shifts were 0.35/0.28, 0.32/0.35, 0.63/0.44, 0.55/0.51, and 0.69/0.42 mm at gantry angles 180, 160, 140, 120, and 100, respectively. CONCLUSION: Our results in the phantom study suggest that ESTB images from a sliding window IMRT plan can be used to detect spine motion, with submillimeter precision in the 2D plane perpendicular to the beam.