Abstract
BACKGROUND: Unstable femoral neck fractures with medial calcar defects are difficult to manage. The optimal fixation methods for these fractures have been a subject of ongoing debate among orthopedic surgeons. In this study, three different fixation techniques for vertical, medial defected femoral neck fractures were compared. METHODS: In this study, a biomechanical analysis was conducted to compare three fixation methods: cannulated screws (Group 1), cannulated screws combined with a medial buttress plate (Group 2), and intramedullary nails (Group 3). Synthetic composite bone models representing vertical collum femoris fractures with medial calcar defects were used. Each group consisted of seven specimens, and, to maintain consistency, a single surgeon performed the surgical procedure. Biomechanical testing involved subjecting the specimens to axial loading until failure, and the load to failure, stiffness, and displacement values were recorded. Normality was tested using the Shapiro-Wilk test. One-way ANOVA and Tukey's HSD post hoc test were used for comparisons. RESULTS: The difference in the load to failure values was statistically significant among the groups, with Group 2 exhibiting the highest load to failure value, followed by Group 3 and Group 1. Stiffness values were significantly higher in Group 2 than in the other groups. Displacement values were not significantly different between the groups. Fracture and displacement patterns at the point of failure varied across the groups. CONCLUSION: The results of this study indicate that fixation with a medial buttress plate in combination with cannulated screws provides additional biomechanical stability for vertical femoral neck fractures with medial calcar defects. Intramedullary nail fixation also demonstrated durable stability in these fractures. These findings can be used to better understand current management strategies for these challenging fractures to promote the identification of better evidence-based recommendations.