Abstract
During the development of a carbon-reinforced mortar interlayer for bridges, the idea of an electrochemical chloride barrier arose. An electrical field is generated between two carbon meshes, and the negatively charged chloride ions are held on the polarized upper carbon mesh to prevent chloride-induced corrosion in the reinforcement. Laboratory tests unexpectedly showed that higher voltages lead to an increase in chloride ions for certain depths of the reference probes. This paper discusses the implementation of analytical and numerical models that finally explain the effect only by the acting diffusion and migration with the help of a finite differences model and finite elements simulations. The effect of the local minimum is limited to positions above the depth of the first carbon layer of the test specimens. It is caused by the lines of the electrical field between the first and second carbon layer. According to the experimental and finite elements simulation results, higher voltages lead to lower chloride concentrations for all positions below the first carbon layer only after sufficient time duration. Therefore, the intended effect of an electrochemical chloride barrier can in general only be observed and confirmed after a certain time depending on position, conditions and parameters.