Abstract
Injection molding is one of the most promising technologies for the large-scale production and application of polymeric microfluidic chips. The multi-objective optimization of injection molding process for substrate and cover plate on protein electrophoresis microfluidic chip is performed to solve the problem that the forming precision is difficult to coordinate because of the cross-scale structure characteristics for chip in this paper. The innovation for this research is that an optimization approach and a detailed fuzzy rule determination method are proposed in multi-objective optimization for protein electrophoresis microfluidic chip. In more detail, firstly, according to the number and level of process parameters, the orthogonal experimental design is carried out. Then, the experiments are performed. Secondly, the grey relational analysis (GRA) approach is employed to process the response data to gain the grey relational coefficient (GRC). Thirdly, the grey fuzzy decision making method which combines triangular membership function and gaussian membership function is adopted to obtain the grey fuzzy grade (GFG). After that, the optimal scheme of process parameters was predicted by the grey fuzzy grade analysis. Finally, the superiority of Taguchi grey fuzzy decision making method are verified by comparing the results of original scheme, optimal scheme and prediction scheme. As a result, compared with the original design, the residual stress of substrate plate (RSS), residual stress of cover plate (RSC), warpage of substrate plate (WS), warpage of cover plate (WC) and replication fidelity of microchannel for substrate plate (RFM) on the prediction scheme for Taguchi grey fuzzy decision making method were reduced by 32.816%, 29.977%, 88.571%, 74.390% and 46.453%, respectively.