Abstract
Bimetallic Ni-Sn alloys have been recognised as promising catalysts for the transformation of furanic compounds and their derivatives into valuable chemicals. Herein, we report the utilisation of a supported bimetallic RANEY® nickel-tin alloy supported on aluminium hydroxide (RNi-Sn(x)/AlOH; x is Ni/Sn molar ratio) catalysts for the one-pot conversion of biomass-derived furfural and levulinic acid to 1,4-pentanediol (1,4-PeD). The as prepared RNi-Sn(1.4)/AlOH catalyst exhibited the highest yield of 1,4-PeD (78%). The reduction of RNi-Sn(x)/AlOH with H(2) at 673-873 K for 1.5 h resulted in the formation of Ni-Sn alloy phases (e.g., Ni(3)Sn and Ni(3)Sn(2)) and caused the transformation of aluminium hydroxide (AlOH) to amorphous alumina (AA). The RNi-Sn(1.4)/AA 673 K/H(2) catalyst contained a Ni(3)Sn(2) alloy as the major phase, which exhibited the best yield of 1,4-PeD from furfural (87%) at 433 K, H(2) 3.0 MPa for 12 h and from levulinic acid (up to 90%) at 503 K, H(2) 4.0 MPa, for 12 h. Supported RANEY® Ni-Sn(1.5)/AC and three types of supported Ni-Sn(1.5) alloy (e.g., Ni-Sn(1.5)/AC, Ni-Sn(1.5)/c-AlOH, and Ni-Sn(1.5)/γ-Al(2)O(3)) catalysts afforded high yields of 1,4-PeD (65-87%) both from furfural and levulinic acid under the optimised reaction conditions.