Abstract
The cold spot forge-welding method, recently developed to achieve high-productivity and high-strength dissimilar material joining, was applied to multiple solid-phase joining of aluminum (Al) foils simulating tab-lead electrodes. Fifty Al foils of 12-μm thickness were sandwiched between 0.5 and 0.8 mm A1050 Al alloy plates and pressurized with 6-mm diameter punch for 1 s. The effect of bonding temperature (330-420 °C) and the reduction ratio (R, 1.4-3) on the tensile shear load of the joint was investigated. A lower R value at a higher bonding temperature resulted in base metal fracture (i.e., plug fracture) of the Al alloy plate. The maximum load reached 410 N using a reduction ratio of higher than 2.1 and bonding temperature of 420 °C. The processed foils were properly stretched in the plane without breakage, and a total of 51 sound layered bonded interfaces were formed. The results also confirmed that the oxide film became more rarefied with increasing R. These results are expected to be applicable to high-throughput, high-reliability bonding of secondary battery electrodes.