Abstract
Advanced oxidation processes (AOP), using semiconductor (SC) and hydroxyapatite (HA) composites, are promising due to the synergy of photocatalytic and adsorption properties. Still, dye removal efficiency of composites based on HA-SC remains low, because most of the research reported consider single SC materials. In this work, nanocrystalline xerogels of titanium oxide (TiO(2)) with copper oxide (CuO) and HA were synthesized by the sol-gel process. HA was obtained by the precipitation method without heat treatment and calcined in the range of 200-1000 °C. TiO(2) and copper precursors were added to a sol containing HA in a 12:1 mol ratio, obtaining HA-TiO(2) and HA-CuO-TiO(2) nanomaterials. The xerogels were characterized by X-ray diffraction, scanning electron microscopy, emission field scanning electron microscopy and photoresponse. Their performance in the photocatalytic discoloration of an aqueous solution acid yellow dye 36 (AY36) was evaluated, using visible and UV light. The best discoloration was achieved with HA-CuO-TiO(2) xerogels with HA calcined at 600 °C, showing a degradation kinetic constant of 0.24 min(-1). In contrast, HA-TiO(2) materials showed little or no photocatalytic activity, but strong dye adsorption/desorption. The thermal treatment of HA determines the filament-like morphology and degree of compaction of the nanomaterials, which are relevant in the crystallite size and sensitization of the SC matrix. Further studies must address the surface chemistry and rectifying properties of the best SC composite to have a more complete understanding of the mechanisms involved.