Nondestructive nanofabrication on Si(100) surface by tribochemistry-induced selective etching

利用摩擦化学诱导选择性刻蚀在Si(100)表面进行无损纳米加工

阅读:1

Abstract

A tribochemistry-induced selective etching approach is proposed for the first time to produce silicon nanostructures without lattice damage. With a ~1 nm thick SiOx film as etching mask grown on Si(100) surface (Si(100)/SiOx) by wet-oxidation technique, nano-trenches can be produced through the removal of local SiOx mask by a SiO2 tip in humid air and the post-etching of the exposed Si in potassium hydroxide (KOH) solution. The material removal of SiOx mask and Si under low load is dominated by the tribochemical reaction at the interface between SiO2 tip and Si/SiOx sample, where the contact pressure is much lower than the critical pressure for initial yield of Si. High resolution transmission electron microscope (HRTEM) observation indicates that neither the material removal induced by tribochemical reaction nor the wet etching in KOH solution leads to lattice damage of the fabricated nanostructures. The proposed approach points out a new route in nondestructive nanofabrication.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。