Cold versus thermal neutron source: assessment of performance of the KWS-2 SANS diffractometer of the Jülich Centre for Neutron Science at the FRM II reactor

冷中子源与热中子源:对于利希中子科学中心KWS-2小角中子散射衍射仪在FRM II反应堆的性能评估

阅读:1

Abstract

The small-angle neutron scattering (SANS) diffractometer KWS-2 of the Jülich Centre for Neutron Science at the Heinz Maier-Leibnitz Zentrum, Garching, Germany, is a high-flux instrument based on the combination of a specially developed neutron guide system, which allows delivery of a high neutron intensity for a wide wavelength range λ between 2.8 and 20 Å to the instrument, and a versatile velocity selector, which allows an easy choice of wavelength spread Δλ/λ depending on whether the specific scientific goal is either improved resolution, i.e. Δλ/λ = 10%, or high intensity, i.e. Δλ/λ = 20%. Here we report an evaluation of KWS-2 performance by measurements and McStas simulations under the condition that only the thermal neutron source (TNS) is available at the FRM II reactor. According to the simulations, a flux decrease by a factor of 2.5 for λ = 2.8-3 Å and by a factor of 10 for λ ≥ 4.5 Å is expected if the reactor is operated only with the TNS compared with the established performance with cold neutrons provided by the cold neutron source. The flux decrease in TNS operation can be mitigated for λ ≥ 4.5 Å by using a low-resolution velocity selector which provides Δλ/λ = 20% for standard positioning and Δλ/λ = 35% when tilted at an angle ξ(i) = -10° to the beam axis. According to measurements, this degradation of resolution for increasing intensity does not seem to be critical for the structural characterization of small biological morphologies, which would be one of the most investigated topics if only thermal neutrons were available at the FRM II. However, ordering effects in the scattering characteristics of lamellar soft or biophysical systems are barely observable when the resolution is relaxed to Δλ/λ ≥ 20%, which defines the performance limits of the experimental approach. Furthermore, by using MgF(2) focusing lenses when working with large samples, an intensity gain on the sample of up to 12-fold is achieved while keeping the same Q (min) resolution as with the standard pinhole mode, restoring the flux loss expected with thermal neutrons for λ ≥ 7 Å.

特别声明

1、本页面内容包含部分的内容是基于公开信息的合理引用;引用内容仅为补充信息,不代表本站立场。

2、若认为本页面引用内容涉及侵权,请及时与本站联系,我们将第一时间处理。

3、其他媒体/个人如需使用本页面原创内容,需注明“来源:[生知库]”并获得授权;使用引用内容的,需自行联系原作者获得许可。

4、投稿及合作请联系:info@biocloudy.com。