Abstract
Membrane fouling limits the rapid development of membrane separations. In this study, a blend membrane containing polycationic liquid (P(BVImBr(1)-co-PEGMA(1))) is presented that can improve the antifouling performance of polyvinylidene fluoride (PVDF) membranes. By mixing the polycationic liquid into PVDF, an improved membrane-surface hydrophilicity and enlarged membrane porosity were detected. The water contact angle decreased from 82° to 67°, the porosity enlarged from 7.22% to 89.74%, and the pure water flux improved from 0 to 631.68 L m(-2) h(-1). The blend membrane surfaces were found to be always positively charged at pH 3~10. By applying the membranes to the filtration of oil/water emulsion and bovine serum albumin (BSA) solution, they showed a very high rejection rate to pollutants in wastewater (99.4% to oil droplets and 85.6% to BSA). The positive membrane surface charge and the increased membrane hydrophilicity resulted in excellent antifouling performance, with the flux recovery rates of the dynamic filtration tests reaching 97.3% and 95.5%, respectively. Moreover, the blend membranes demonstrated very low BSA adhesion and could even kill S. aureus, showing excellent antifouling properties.