Abstract
As a kind of renewable resource and natural biomass, starch has been widely used to substitute plastics in the modern industry and is regarded as one of the most promising biodegradable materials. The newly developmental rattan, straw biomass rattan (SBR) as weaving material, has been exploited as per our previous work, which possessed advantages of both natural rattan and pure plastic rattan. The main objective of the work was to improve the properties of SBR by corn starch (CS). Based on the manufacturing of the above composites, the experiments of SBR that enhanced with CS on mechanical properties, melting performance, hydroscopicity, thermogravimetric analysis, and microstructures were tested in this study. The results revealed that when the content of CS increased gradually within the range of 0, 3, 6, 9 12, and 15 wt.%, the mechanical properties and melt index of the composite both increased first and then decreased, with 6 to 12 wt.% as the optimal dosage range. In contrast, the water absorption of SBR kept increased in this range, indicating an easier biodegradable. With CS added, the microstructure of SBR was examined by scanning electron microscope and found the microscopic surfaces and sections to become smoother, and that could improve the compatibility and tenacity between the materials. As a result, CS in moderation can be used as a supplement to enhance SBR, and improve their characteristics which will enhance the mechanical properties of the composites for future perspectives.