Abstract
With the need of developing new materials, exploring new phenomenon, and discovering new mechanisms under extreme conditions, the response of materials to high-pressure compression attract more attention. However, the high-pressure state deviating from the Hugoniot line is difficult to realize by conventional experiments. Gas gun launching graded materials could reach the state. In our work, the corresponding Al-Cu composites and graded materials are prepared by tape casting and hot-pressing sintering. The microstructure and the acoustic impedance of the corresponding Al-Cu composites are analyzed to explain the impact behavior of Al-Cu graded materials. Computed tomographic testing and three-dimension surface profilometry machine results demonstrated well-graded structure and parallelism of the graded material. Al-Cu GMs with good parallelism are used to impact the Al-LiF target at 2.3 km/s using a two-stage light-gas gun, with an initial shock impact of 20.6 GPa and ramping until 27.2 GPa, deviating from the Hugoniot line.