Abstract
Multilayered materials are widely studied due to their special structures and great properties, such as their mechanical ones. In this paper a novel and effective technique, a quadruple-layering approach, was used to fabricate multilayered materials. This approach increases the number of layers rapidly via simple operations. Materials with 4, 16, and 64 layers with alternating layers of polypropylene and nanocomposites were fabricated using this approach, and their film morphology and mechanical properties were studied. The influence of the number of layers on the mechanical properties of the materials and the relationship between the mechanical properties of each material were investigated. The results illustrated that the tensile modulus and strength were enhanced and elongation at the break increased when the layer numbers of the multilayered materials increased. However, this approach has a defect in that as the layer number increases, the layer thickness was not uniform, thus restricting the improvement of properties. This may need to be further studied in future work.