Abstract
In this study, we developed a unique adsorbent known as extractant-impregnated resin (EIR) by surface impregnation of XAD-11600 amberlite resin with the Vesavin ligand. This resin demonstrated exceptional selectivity for the absorption of lead (Pb(2+)) ions from aqueous solutions. The ability of EIR to remove lead from polluted water was studied as a function of experimental parameters, including the kinetics, equilibrium, and thermodynamics of the adsorption process. The experimental results provided the basis for the fitting of equilibrium adsorption isotherms with the Langmuir model, and the maximum adsorption capacity of EIR for Pb(II) ions was determined to be approximately 1662 mg/g. Kinetic and thermodynamic studies were also conducted to gain insight into the behavior of the adsorption process. It was found that the rate of penetration of lead ions into the particle was the primary factor controlling the absorption process of lead on the surface of the porous adsorbent. Additionally, the studies demonstrated that the EIR can be utilized for multiple absorption and desorption cycles.