Abstract
In this paper, chemically synthesized copper oxide nanoparticles (CuO-NPs), were employed for two processes: one is photocatalytic degradation and second one adsorption for the sorption of safranine (SA) dye in an aqueous medium at pH = 12.01. The optimized analytes amount (nano-adsorbent = 0.10 g, conc. range of SA dye 56.13 ppm to 154.37 ppm, pH = 12.01, temperature 303 K) reached to equilibrium point in 80 min, which acquired for chemical adsorption-degradation reactions. The degredated SA dye data's recorded by UV-visible spectroscopy for the occurrence of TMO-NMs of CuO-NPs at anticipated period of interval. The feasible performance of CuO-NPs was admirable, shows good adsorption capacity qm = 53.676 mg g(-1) and most convenient to best fitted results establish by linear regression equation, corresponded for selected kinetic model (pseudo second order (R(2) = 0.9981), equilibrium isotherm models (Freundlich, Langmuir, Dubnin-Radushkevich (D-R), Temkin, H-J and Halsey), and thermodynamic parameters (∆H° = 75461.909 J mol(-1), ∆S° = 253.761 J mol(-1), ∆G° = -1427.93 J mol(-1), Ea = 185.142 J mol(-1)) with error analysis. The statistical study revealed that CuO-NPs was an effective adsorbent certified photocatalytic efficiency (η = 84.88%) for degradation of SA dye, exhibited more feasibility and good affinity toward adsorbate, the sorption capacity increases with increased temperature at equilibrium point.