Abstract
Antibiotics, as emerging persistent pollutants, pose significant threats to human health. The effective and low-cost removal of ciprofloxacin (CIP) from wastewater has become an important research focus. In this study, fly ash (FA) was used as the raw material, and modified fly ash (MFA) was prepared by varying microwave power, alkali concentration, and immersion time to investigate its adsorption characteristics for CIP. Results showed that the optimal preparation conditions for MFA with the most effective adsorption of CIP, using the Box-Behnken response surface methodology, were a microwave power of 480 W, an alkali concentration of 1.5 mol/L, and a modification time of 3 h. Scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analyses revealed that after modification, the glassy structure of FA is destroyed, the specific surface area is increased, and obvious hydroxyl O-H absorption peaks appear. Both FA and MFA exhibited adsorption processes for CIP that conformed to pseudo-second-order kinetics and the Langmuir equation. Maximum adsorption of CIP (9.61 and 12.67 mg/g) was achieved at pH = 6. With increasing temperature, the adsorption capacity of both FA and MFA for CIP decreased, indicating an exothermic process. The adsorption capacity of CIP decreased with increasing ion concentration, with the impact order of ions being Al(3+) > Ca(2+) > Na(+). The results show that pore filling, electrostatic interaction, ion exchange and complexation are the main ways of CIP adsorption by FA. Microwave alkali modified fly ash is an economical and efficient adsorbent for CIP removal in water, realizing the purpose of "treating waste with waste". This study provides a scientific basis for controlling CIP treatment in wastewater.